Preview site, still being built.Live site: expertelectricalservices.com.au
Expert Electrical Services
Call the Experts02 4744 3743
Book Today
Supplied & installed by EES

Evnex E2 Flex

The smart charger that grows with you.

A 7.4 kW single-phase smart charger for homes without solar — charge overnight on cheap power now, and unlock solar charging later with a software upgrade. No new charger, no second callout.

7.4 kW single-phase5 m Type 2 tetherWi-Fi · solar upgradeable
Evnex E2 Flex
Evnex E2 Flex
5.0★
Google rating
140+
5-star reviews
10+
Years local
Lifetime
Workmanship
The charger

Evnex E2 Flex

The E2 Flex is Evnex’s most affordable smart charger. It charges quickly and safely from the grid, comes with smart scheduling so you can top up on cheaper overnight rates, and has home overload protection built in.

Don’t have solar yet? The Flex is the smart pick. When you’re ready for solar down the track, it unlocks solar charging with a software upgrade — no new charger and no electrician callout needed. NZ-made, backed by a four-year Evnex warranty on top of our lifetime workmanship guarantee.

Expert Electrical Services apprentice setting up an Evnex charger in a garage
Features

What makes it good

Set and forget

Plug in anytime and schedule charging for when power is cheapest. Wake up to a full battery every morning.

Solar when you’re ready

A one-off software upgrade unlocks solar charging later. No new hardware, no return visit from the sparky.

Won’t blow a fuse

Built-in home overload protection automatically slows or pauses charging when your home’s power use is high.

In the app

Control it from your phone

Every Evnex charger comes with the Evnex app. Set a schedule so the car fills up on the cheapest power overnight, follow a live charge from your phone, and see exactly what each session cost and where the power came from. If it ever needs a hand, Evnex can support the charger remotely.

Evnex app — Charging summary
Charging summaryUsage, cost, range added and carbon over any period you pick.
Evnex app — Live grid emissions
Live grid emissionsSee how clean the grid is right now and charge when it's greenest.
Evnex app — Session history
Session historyEvery charge, itemised — time, energy, cost and where the power came from.
Specifications

The detail

Charging capacity
7.4 kW, 32 A, single-phase (up to ~50 km of range per hour)
Supply voltage
230 V AC, 50/60 Hz
Cable
5 m attached Type 2 tether
Connectivity
Wi-Fi 802.11 b/g/n 2.4 GHz
Solar
Grid charging out of the box; solar charging via a one-off software upgrade
App & control
Evnex driver app — setup, scheduling and reporting
Display
LED status indicator with press-and-hold “charge now” override
Operating temperature
-25°C to 55°C
Weight
4.2 kg (including 5 m Type 2 cable)
Ingress / impact rating
IP55 (indoor & outdoor) · IK08
Warranty
4-year Evnex (residential) + lifetime EES workmanship guarantee
Origin
Made in New Zealand
Compatible with

Will it suit your car and home?

The quick answer on cars, solar and batteries, and the power supply the E2 Flex needs.

Your car

  • Every new EV sold in Australia uses a Type 2 plug, so this charger suits Tesla, BYD, MG, Kia, Hyundai, Polestar, Volvo, BMW and the rest.
  • Tethered cable, so it’s plug in and go. For a Type 1 import, ask us about the X22 socket version.

Solar and batteries

  • Charges from the grid out of the box, on whatever schedule suits your tariff.
  • Got solar, or getting it? A one-off software upgrade from Evnex switches solar charging on. No new charger and no electrician visit.
  • Works with home batteries through the app settings once solar is switched on.

Your power supply

  • Made for single-phase homes. Not sure what you have? We can tell you.
  • Needs its own circuit and a 32 A Type A RCBO at the switchboard. We check your board has room before we quote.
  • Home overload protection slows or pauses charging if the house is drawing too much.
How it compares

E2 Flex vs the rest

Every charger we install, side by side. Scroll across on your phone.

FeatureE2 FlexYou’re viewingE2 CoreOur pickE2 PlusX22Tesla Gen 3Zappi V2.1Ocular LTE Plus
Charging power7.4 kW7.4 kW7.4 kW22 kW7.4 kW single-phase · 22 kW three-phase7 kW or 22 kW7 kW or 22 kW
Home power supplySingle-phaseSingle-phaseSingle-phaseThree-phase (can run on 1, 2 or 3 phases)Single or three-phaseSingle or three-phase modelsSingle or three-phase models
Cable5 m tethered5 m tethered8 m tethered5 m tethered or socket7.3 m tethered6.5 m tethered or socket6 m tethered
ConnectionWi-FiWi-Fi4G + Wi-Fi4G + Wi-Fi + EthernetWi-FiWi-Fi + EthernetBluetooth only
Charge from your solarPaid software upgradeOnly with a Powerwall + Tesla carYes, ECO and ECO+ modesScheduling only
Home overload protectionPower management set at installGrid limit via supplied clampFixed current limit only
Maker’s warranty4 years4 years4 years4 years4 years3 years3 years
Best forHomes without solar (yet)Most homes, with or without solarWeak Wi-Fi, long reach or Tesla ownersThree-phase homesTesla drivers (charges any Type 2 EV)Solar owners who want every spare kWSimple charging without Wi-Fi

*Range per hour is the maker’s own figure. Your car sets the real speed: many EVs accept 7 kW or 11 kW on AC, so a 22 kW charger only charges at 22 kW if your car can take it.

See the full comparison

How we install it

Fitted properly, tested, and signed off

Whatever charger you choose, the install standard is the same. Here’s what’s included as standard:

Evnex Certified Installer

We're an Evnex Certified Installer. We fit the Evnex range every week and know it inside out — set up, tested and registered to the app properly, the first time.

  • Dedicated circuit with its own 32 A Type A RCBO and isolator in the switchboard
  • Wired on its own dedicated 6 mm² circuit (minimum), sized to suit your charger
  • Tested with a calibrated EV simulator, never plugged into your car
  • CCEW lodged through the Building Commission NSW eCert portal, board and isolator labelled, full AS/NZS 3000 testing
  • Fixed price on the signed quote, no callout fee, backed by our lifetime workmanship guarantee

Before we lock in your quote we confirm your home Wi-Fi reaches the charger. If it doesn’t, we quote the 4G-capable model separately — decided upfront, never swapped on install day.

Recent work

Recent EV charger installs

Evnex EV charger installed on a dark brick pillar
Evnex charger on a garage pillar
Electrician testing a home EV charger with a calibrated EV simulator
Testing with an EV simulator, never your car
Evnex EV charger with tethered Type 2 cable on a brick wall
Evnex charger, cable holster fitted
FAQ

Questions we get asked

Can I add solar charging later?

Yes. A one-off software upgrade bought from Evnex switches solar charging on. There’s no new charger and no electrician visit.

Should I get the Flex or the Core?

If you don’t have solar and aren’t planning it soon, the Flex does everything you need: scheduling, app control and overload protection. If you already have solar, or want it working from day one, get the Core.

Will the E2 Flex charge my car?

Almost certainly. Every new EV sold in Australia uses a Type 2 plug. If you drive an older Japanese import with a Type 1 plug, tell us the model and we’ll check which charger and cable you need.

Can I charge on cheap overnight power?

Yes. Set a schedule in the Evnex app and the car charges when your off-peak rate kicks in.

What if my Wi-Fi doesn’t reach the charger?

We check that before your quote is locked in. If the signal doesn’t reach, we quote the 4G-capable E2 Plus separately so you can decide upfront. We never swap models on install day.

Will I need a switchboard upgrade?

Not always. The charger needs its own circuit with a 32 A Type A RCBO. If your board is old, full or can’t safely take it, we’ll tell you before you book and put the work on your quote. No surprises on the day.

How do you test the charger?

With a calibrated EV simulator. It loads the charger under real charging and fault conditions. We never plug into your car to test. We also do full AS/NZS 3000 testing and lodge the CCEW through the Building Commission NSW eCert portal.

What warranty do I get?

Evnex covers the charger with a 4-year warranty for home installs. On top of that, our workmanship is guaranteed for life.

How much does the E2 Flex cost to install?

Every home is different: the distance from your switchboard, the wall, and whether the board needs work all change the job. We give you a free, fixed price on a written quote, with no callout fee. What’s on the quote is what you pay.

Posted on Google
A
Ashraf Nashed
Google review · 5 stars

“I recently had Expert Electrical Services install my Evnex EV charger, and I could not be happier with the quality of work and professionalism. The final result is clean, safe, and perfectly set up.”

Other chargers we install

Not quite the one?

Get a price on the Evnex E2 Flex

Supplied and installed, tested and guaranteed for life. Free quote, no callout fee.

Phone02 4744 3743
Emailadmin@expertelectricalservices.com.au
Service areaWestern Sydney and the Blue Mountains
LicenceNSW Electrical Licence No. 386059C
ABN86 631 084 538
Expert Electrical Services
Call the Experts.
Call NowBook Online